Features

• Suitable for use with all types of power flushing equipment
  No need to neutralise, just flush well with clean water
  Restores flow, improves circulation and reduces boiler noise
  Removes sludge, flux residues, black iron oxide and scale slurry

Application

• To clean a central heating system in accordance with BS7953:2006, Power Flush HS8
  should be circulated with all valves open for a minimum period of one hour before flushing. For badly contaminated systems
  a longer circulation period may be necessary. Warming the system will aid the process. No neutralisation procedure is required.
  After cleaning, the system should be drained and thoroughly flushed through all drain points with clean water. Refill and treat
  with Central Heating Inhibitor HS1.
• Dose Rate: One litre of Power Flush HS8 is
  sufficient to treat a typical domestic central heating system with up to ten radiators. For larger systems an additional bottle will
  be required. Overdosing does not present a problem.

Dosing Instructions

• Open vented systems: Dose through the fill and expansion system – sufficient water must be drained
  from the system to ensure that all of the product enters the circulating part of the system
• Sealed Systems: If the system is empty add to any convenient point before filling; if full, dose
  through any convenient access
  point. Suitable with use with all types of power flushing equipment.